New 2010 BMW R1200GS USA Specifications

Special to the New BMW R1200GS USA there may be slight differences in some parts of the New BMW R1200GS kind on the market in general following specification from USA New BMW R1200GS, to see the general specifications on the market please see the New 2010 BMW R1200GS Enduro Version

2010 BMW R1200GS - USA Specifications USA MSRP: TBA USD

Engine Type Air/oil-cooled flat twin ('Boxer') 4-stroke engine, two camshafts and four radially aligned valves per cylinder, central balancer shaft

Bore x stroke 101 mm x 73 mm

Capacity 1,170 cc

Rated output 81 kW (110 hp) at 7,750 rpm

Max. torque 120 Nm at 6,000 rpm

Compression ratio 12.0 : 1

Mixture control / engine management Electronic intake pipe injection / BMS-K+ digital engine management with overrun fuel cut-off, twin spark ignition

Emission control Closed-loop 3-way catalytic converter, emission standard EU-3

Performance / fuel consumption

Maximum speed over 200 km/h

Fuel consumption per 100 km at constant 90 km/h 4.3 l

Fuel consumption per 100 km at constant 120 km/h 5.5 l

Fuel type Unleaded super and premium, octane number 95-98 (RON) (knock sensor; rated output at 98 RON); optional extra 91 (RON) available

Electrical system

Alternator three-phase alternator 720 W

Battery 12 V / 14 Ah, maintenance-free

Power transmission

Clutch Single dry plate clutch, hydraulically operated

Gearbox Constant mesh 6-speed gearbox with helical gear teeth

Drive Shaft drive



Chassis / brakes

Frame Two-section frame consisting of front and rear sections, load- bearing engine-gearbox unit

Front wheel location / suspension BMW Motorrad Telelever; stanchion diameter 41 mm, central spring strut, spring preload with 5-position mechanical adjustment

Rear wheel location / suspension Cast aluminium single-sided swing arm with BMW Motorrad Paralever; WAD strut (travel-related damping), spring pre-load hydraulically adjustable (continuously variable) at handwheel, rebound damping adjustable

Suspension travel front / rear 190 mm / 200 mm

Wheelbase 1,507 mm

Castor 101 mm

Steering head angle 64.3�

Wheels Cast aluminium wheels

Rim, front 2.50 x 19"

Rim, rear 4.00 x 17"

Tyres, front 110/80 R 19

Tyres, rear 150/70 R 17

Brake, front Dual disc brake, floating brake discs, diameter 305 mm, 4-piston fixed calipers

Brake, rear Single disc brake, diameter 265 mm, double-piston floating caliper

ABS Optional extra: BMW Motorrad Integral ABS (part-integral), can be switched off

Dimensions / weights

Length 2,210 mm

Width (incl. mirrors) 915 mm

Height (excl. mirrors) 1,450 mm

Seat height, unladen weight 850 / 870 mm (low seat 820 mm, lowered suspension 790 mm)

Inner leg curve, unladen weight 1,890 / 1,940 mm (low seat 1,820 mm, lowered suspension 1,760 mm)

Unladen weight, road ready, fully fuelled 1) 229 kg

Dry weight 2) 203 kg

Permitted total weight 440 kg

Payload (with standard equipment) 211 kg

Usable tank volume 20 l

Reserve approx 4.0 l

Technical data relate to the unladen weight (DIN)


1) According to guideline 93/93/EWG with all fluids, fuelled with at least 90% of usable tank volume
2) Unladen weight without fluids